Anycubic Water-Wash Resin 2 1kg – Grey

Product details

The ANYCUBIC Water Wash Resin 2.0 Grey is designed for MSLA/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (≥5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365–405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38–43 MPa and hardness of 82–85 HD — delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 20–40 °C for consistent layer adhesion and reliable results. Features • Water-washable formula — rinse printed parts with water (≥5 min), no IPA required during washing • Compatible with 365–405 nm MSLA/LCD resin printers • Grey colour for display models, miniatures, and detail-focused prints • Cured hardness of 82–85 HD with tensile strength of 38–43 MPa • Low volume shrinkage rate of 2.2–5.5% for dimensionally accurate output • Post-cure in 3 minutes at 405 nm UV (25,000–30,000 µW/cm²) • Post-cured resin disposable as standard plastic waste Specifications • Colour: Grey (#7E93A7) • Resin Size: 1kg • Pre-print preparation: Shake well before use • Print environment: 20-40 ℃ • First layer exposure duration: 25-40 s • Normal exposure duration: 2-2.5 s • Print temperature: 20-50 ℃ • Material: Hydrophilic group-modified light-curing resin • Wavelength: 365-405 nm • Viscosity: 190-230/mPa·s(25℃) • Density: 1.07-1.09/g/cm³ • Hardness: 82-85 HD • Tensile Strength: 38-43 MPa • Elongation at Break: 16-22% • Bending Modulus: 48-60 MPa • Bending Strength: 2300-3000 MPa • Young’s Modulus: 1100-1300 MPa • Izod Impact Strength: 133 J/m • Volume Shrinkage Rate: 2.2-5.5% • Cleaning: Water • Washing duration: Medium ≥5 min • UV Wavelength: 405 nm • Curing Temperature: 18-30 ℃ • UV Intensity: 25000-30000 uW/cm² • Curing time: 3 mins • Disposal: • 1. Do not drain wastewater into sewers to avoid contaminating groundwater. • 2. After cleaning, let the wastewater sit in the tank for a period of time. • 3. Place it under sunlight to allow the resin in the tank to fully cure. • 4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution. What’s in the Box • Anycubic Water Wash Resin 2.0 – Grey x1