Features
• Water-washable formula: rinse printed parts with water, no IPA needed
• Compatible with 365–405 nm MSLA/LCD resin printers
• Cured hardness of 82–85 HD with tensile strength of 38–43 MPa
• Low volume shrinkage rate of 2.2–5.5% for accurate output
• Post-cure in 3 minutes at 405 nm UV (25,000–30,000 µW/cm²)
• Post-cured resin can be disposed of as standard plastic waste
Specifications
• Resin Size: 1kg
• Pre-print preparation: Shake well before use
• Print environment: 20-40 ℃
• First layer exposure duration: 25-40 s
• Normal exposure duration: 2-2.5 s
• Print temperature: 20-50 ℃
• Material: Hydrophilic group-modified light-curing resin
• Wavelength: 365-405 nm
• Viscosity: 190-230/mPa·s(25℃)
• Density: 1.07-1.09/g/cm³
• Hardness: 82-85 HD
• Tensile Strength: 38-43 MPa
• Elongation at Break: 16-22%
• Bending Modulus: 48-60 MPa
• Bending Strength: 2300-3000 MPa
• Young's Modulus: 1100-1300 MPa
• Izod Impact Strength: 133 J/m
• Volume Shrinkage Rate: 2.2-5.5%
• Cleaning: Water
• Washing duration: Medium ≥5 min
• UV Wavelength: 405 nm
• Curing Temperature: 18-30 ℃
• UV Intensity: 25000-30000 uW/cm²
• Curing time: 3 mins
• Disposal: 1. Do not drain wastewater into sewers to avoid contaminating groundwater.; 2. After cleaning, let the wastewater sit in the tank for a period of time.; 3. Place it under sunlight to allow the resin in the tank to fully cure.; 4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.
What's in the Box
• Anycubic Water Wash Resin 2.0 1kg x1
